DIY Bookscanner Assembly
I have written about the arrival and packaging of my bookscanner kit from diybookscanner.eu in a previous post.
Here I document the assembly, which was really easy due to the excellent videos by Daniel Reetz on YouTube. I recommend watching them all before even starting to do anything with the kit. Regarding tools needed for the assembly: An electric drill and an electric screw driver are really handy. You’ll need a Philips and a hex tip screwdriver. A rubber hammer is useful but a normal hammer and a piece of scrap wood will do. I am not going to repeat what Daniel has documented so perfectly but just show a series of pictures that document the assembly. This is essentially done in an afternoon.
The Scanner Base
The Cradle Base
Lever Arms with Skateboard Bearings
Base with Cradle Base and Lever Mechanism assembled
Cradle (the part that holds the actual book)
Lighting Module with LED Light
https://lookup-phone-prefix.com
, which will hold the glass and the cameras” width=”300″ height=”225″ /> The Imaging Module, which will hold the glass and the cameras
The whole BookScanner put together
Categorised as: Making
Leave a Reply